Briar Wheels, potter, kiln, & craft supplies
Tel: 01425 652991               Fax: 01425 656188

Lighting & Accessories

Quality lamp fittings and accessories are used by pottery manufactures and ceramists,
suitable for most lighting requirements.


  B301 B314  B312  B311  B313
All brass pole kits are lacquered and supplied with switched BC lamp holder, 2 metres of cable and 10mm fixing nut and fibre washer in compliance with BS EN 61184, to be secured to the B802 wood base, or your ceramic piece.
    Each Per 10
B311 1" Shader Riser Kit £ 5.52 £ Enquire
B312 3" Pole Kit £ 5.68 £ Enquire
B314 8" Pole Kit £ 6.50 £ Enquire
B301 12" Pole Kit £ 7.38 £ Enquire
B313 13" Dogleg Pole Kit £ 8.10 £ Enquire
These low wattage pilot and pigmy bulbs are normally used for illuminating the inside of your ceramic moonlights, or Christmas trees.
B352-1 Each £ Enquire
B352-10 Per 10 £ Enquire
B353-1 Each £ Enquire
B353-10 Per 10 £ Enquire
B354-1 Each £ 0.98
B354-10 Per 10 £ Enquire


  B352               B353               B354
   SBC 10W        SBC 15W       BC 15W
Brass pole extensions can be used to extend any of the BC kits

B318 2" Brass Pole Extension   £ 3.29
B319 3" Brass Pole Extension   £ 3.74
B302 Brassed Switched BC lamp Holders are supplied with 2mtrs of cable 10mm fixing nipple in compliance with BS EN 61184
    Each
B302-1     £ 4.18
B302-10 Per 10 £ Enquire
B304 White Switched BC Lamp Holders are supplied with two metres of cable and ½” pottery fixing nipple, back nut and fibre washer. All in compliance with BS EN 61184.
    Each
B304-1 Each £ Enquire
B304-20 Per 20 £ Enquire
B304-40 Per 40 £ Enquire
B304-60 Per 60 £ Enquire
B304-100 Per 100 £ Enquire
B305  Brassed Steel BC Lamp Holders are supplied with two metres of cable & 10mm fixing nipple, back nut & fibre washer. All in compliance with BS EN 61184.
Normally used where the lamp holder is not visible.
    Each
B305-1 Each £ Enquire
B305-20 Per 20 £ Enquire
B305-40 Per 40 £ Enquire
B305-60 Per 60 £ Enquire
B305-100 Per 100 £ Enquire
Use bulb B354 for Christmas Tree Base.
B303 Brass Unswitched SBC Lamp Holders are supplied with 2 metres of cable and 10mm fixing nipple, back nut and fibre washer. All in compliance with BS EN 61184. Use bulbs B352 pilot, or B353 pigmy bulb.
    Each
B303-1 Each £ 2.99
B303-10 Per 10 £ Enquire
CE APPROVED
BracketLamp Kits are supplied with 2 metres of cable and 10mm fixing nipple. Suitable for Gare moonlight kits and all side entry ceramic pieces.
B356-1   Each £ Enquire B300-1   Each £ Enquire
B356-10 Per 10 £ Enquire B300-10 Per 10 £ Enquire
 
Turn your figurine into a complete Lamp base with this stained lacquered wood base.   Size 6 ¼” x 8 ¼”
  Each
B802-1      Each £ Enquire
B306-1 Each £ Enquire   B307-1 Each £ Enquire
B306-10 Per 10 £ Enquire   B307-10 Per 10 £ Enquire
3 Amp plug
complies with BS 1363
Inline switch
complies with NFC 61-120
Cord Grip Cable Grip
B308-1 Each £ 0.10 B309-1 Each £ Enquire
B308-10 Per 10 £ Enquire B309-10 Per 10 £ Enquire
Suppliers to:- Craft & Hobby Potters - Ceramists - Schools - Education

Briar Wheels & Supplies.,
Whitsbury Road,
Fordingbridge,
Hampshire. SP6 1NQ.
ENGLAND.

Tel. +44 (0)1425-652991   Fax. +44 (0)1425-656188   e-mail

PLEASE NOTE: Prices charged will be those applicable at time order is received.
Prices exclude VAT.            E&OE.